Recommendation on phone holder that does not make mark on the interior?
Arid innovation
New Member
- First Name
- George
- Joined
- Oct 21, 2024
- Threads
- 0
- Messages
- 4
- Reaction score
- 1
- Location
- Bristol, UK
- Vehicles
- Jaguar F-type V6S, Audi A6, Porsche Tycan
We do a foam lined phone holder that attaches to the centre console. please see attached link. Hi https://aridinnovation.co.uk/produc...kRJ4hq16v7d8hhHKMdsVSuV4q8HqOBW2mL2_hav7WQ3qv
ze_shark
Well-Known Member
- First Name
- JC
- Joined
- Feb 28, 2024
- Threads
- 9
- Messages
- 224
- Reaction score
- 217
- Location
- Southern Malaysia
- Vehicles
- 550M, 355GTS F1, Taycan CT4S J1.2
How does the holder attach to the console ? Adhesive on leather ?
figure1a
Well-Known Member
- Joined
- Nov 8, 2022
- Threads
- 1
- Messages
- 142
- Reaction score
- 84
- Location
- San Diego
- Vehicles
- Taycan Turbo S
This is by far the best one. It looks like Porsche put it in and also charges wirelessly:
https://nine-volt.com/products/wire...-for-apple-iphone?_pos=1&_sid=a07196fea&_ss=r
https://nine-volt.com/products/wire...-for-apple-iphone?_pos=1&_sid=a07196fea&_ss=r
jasonh
Member
- First Name
- Jason
- Joined
- Oct 4, 2021
- Threads
- 1
- Messages
- 21
- Reaction score
- 24
- Location
- Kirkland, WA
- Vehicles
- 2020 Taycan 4s
Try a holder from Proclip - I have one in my Taycan and another in my wife’s LC 500. Sturdy and no marks. Recommended!
https://www.proclipusa.com/pages/product-finder
https://www.proclipusa.com/pages/product-finder
Arid innovation
New Member
- First Name
- George
- Joined
- Oct 21, 2024
- Threads
- 0
- Messages
- 4
- Reaction score
- 1
- Location
- Bristol, UK
- Vehicles
- Jaguar F-type V6S, Audi A6, Porsche Tycan
No adhesive whatsoever, it clips in under the centre console. 2 seconds to install, no tools, no mess and is easily removed.
jmebid
Active Member
- First Name
- Jamie
- Joined
- Feb 23, 2025
- Threads
- 2
- Messages
- 30
- Reaction score
- 20
- Location
- California
- Vehicles
- 1988 911. CAB 2017 911 2021 Taycan 4S
Place phone in the frunk and enjoy the drive 
ScottHelme
New Member
- First Name
- Scott
- Joined
- Apr 23, 2025
- Threads
- 0
- Messages
- 2
- Reaction score
- 2
- Location
- UK
- Website
- scotthelme.co.uk
- Vehicles
- Porsche Taycan Turbo S
I 3D printed one of these: https://www.thingiverse.com/thing:6145934
It fits really well, has never come off, and I put a little fabric tape on the inside to protect the leather. I've removed it a couple of times to check and so far, it hasn't left any marks.
I used some JB Weld to mount one of these Anker MagSafe chargers to it: https://www.amazon.co.uk/dp/B0CMH2JVMM
The cable tucks in behind the trim and goes to the arm rest for power, the whole thing works really well.
It fits really well, has never come off, and I put a little fabric tape on the inside to protect the leather. I've removed it a couple of times to check and so far, it hasn't left any marks.
I used some JB Weld to mount one of these Anker MagSafe chargers to it: https://www.amazon.co.uk/dp/B0CMH2JVMM
The cable tucks in behind the trim and goes to the arm rest for power, the whole thing works really well.
Sponsored
