Phone holder?

[Shawn_Turismo]

Shawn, the cable is wired purely via pressure fit in between the panels, here are some pictures that illustrate the routing.

Had one more question for you @nischalr, is this wireless charger holding your phone under hard acceleration etc? The magnet feels a bit less sticky compared to an Apple wireless charger.

Sponsored

 

[nischalr]

Had one more question for you @nischalr, is this wireless charger holding your phone under hard acceleration etc? The magnet feels a bit less sticky compared to an Apple wireless charger.

Shawn, I use an iPhone 15 pro without a case and it has never been an issue whatsoever even under hard acceleration and launch control. It is plenty strong despite being a little less so compared to the oem iPhone MagSafe charger. I can’t speak to how it would work with a case, depends on if the case has a good MagSafe magnet integrated or not.

 

[Shawn_Turismo]

Shawn, I use an iPhone 15 pro without a case and it has never been an issue whatsoever even under hard acceleration and launch control. It is plenty strong despite being a little less so compared to the oem iPhone MagSafe charger. I can’t speak to how it would work with a case, depends on if the case has a good MagSafe magnet integrated or not.

That sounds good, I’ll do a bit of testing of my own, but that’s really helpful for now. Thank you again!

 

[figure1a]

This one is the best one:
https://nine-volt.com/products/wire...-for-apple-iphone?_pos=1&_sid=a53c51a57&_ss=r

 

[dirty martini]

Here is what I ended up doing. I can tuck the cable a little better.

 

[slothinker]

Another current thread on this topic is possibly worth a look-see:

https://www.taycanforum.com/forum/t...nsole-modifications-needed.21012/#post-324909

 

[PorscheNewb]

I like the setup that I got from www.proclipusa.com

You choose a mount and then a phone holder specific to your phone and put it all together. I chose the Taycan mount obviously and a Charging magsafe mount, although there are many different options. The wire is run into the armrest console and plugged in to provide power. The wire is just pressure fit within the seams of the panels along the way and there was no disassembly.

Hey there, I am trying to find the same set up that you have and cannot see a right sided ProClip mount, just the left side. Also, cannot find the charging MagSafe mount that you have. Could you please point me to these two things?

Also, what type of charge speeds are you seeing with the MagSafe charger?

 

[nischalr]

Hey there, I am trying to find the same set up that you have and cannot see a right sided ProClip mount, just the left side. Also, cannot find the charging MagSafe mount that you have. Could you please point me to these two things?

Also, what type of charge speeds are you seeing with the MagSafe charger?

This is the mounting base : https://www.proclipusa.com/products/855613-proclip-console-mount-porsche-taycan-2020-20xx

It is listed as left, but works on either side as it is symmetrical and you just flip it around the other way to use on the right. I confirmed that this was designed that way and not sure why they specify the left only. But this is the part number I ordered.

As for the charging mount, they have since discontinued the one I have and they have a newer version linked below. It seems to be a 15W charger, so pretty fast.

https://www.proclipusa.com/products/102814-magicmount-charge-elite-wireless-phone-holder-mount

 

[PorscheNewb]

Perfect - thanks on clarification of both points for me!! I’m getting them, looks like the best solution out there.

 

[Arid innovation]

We do one! its a non-charging magsafe mount, very secure and easy to fit. https://aridinnovation.co.uk/produc...kRJ4hq16v7d8hhHKMdsVSuV4q8HqOBW2mL2_hav7WQ3qv

Does anyone have a clever phone holder specific to Taycan. The charger in the center console is a pain to access.

Sponsored