Scotty
Well-Known Member
- First Name
- Scott
- Joined
- Oct 7, 2020
- Threads
- 35
- Messages
- 187
- Reaction score
- 230
- Location
- Los Angeles
- Vehicles
- Taycan4s
- Thread starter
- #1
The dealer wanted $1250 to replace the cabin filter ( retail cost $150) and check my brake fluid level and check the battery cells ( 8 year warranty so this is a joke to pay to check). After doing a little research I changed the filter myself took less than 15 mins. The only good you tube tutorial I found is in Chinese but worth looking at.
Here are the steps if you like to do yourself its not difficult>
1. Order the filter replacement from Sunset Imports . Cost $69 (OEM filter)Part number 9A7-819-429
2. Look at above video
3. under the glove box using a flashlight you see 2 small pins holding the filter cover in place. Using a small tool remove the pins they come right out
4. Remove the plastic filter housing cover and the filter is inside a slot . Pay particular attention when removing the old filter how it fits inside the filter slot ( orientation)
5. The hardest part is getting the new filter into the filter slot. the way to do it is holding the filter in both hands press the sides in think of an accordion / press sides in then as filter goes in press down on a part the bulges out as you are inserting . Again this procedure makes it easy to install but there is little information exactly how to do . Again think of an accordion
6. reinstall the plastic filter housing cover, install the covering insert the 2 pins and you are done.
I was really surprised at all the leaves etc that were in the old filter
Here are the steps if you like to do yourself its not difficult>
1. Order the filter replacement from Sunset Imports . Cost $69 (OEM filter)Part number 9A7-819-429
2. Look at above video
3. under the glove box using a flashlight you see 2 small pins holding the filter cover in place. Using a small tool remove the pins they come right out
4. Remove the plastic filter housing cover and the filter is inside a slot . Pay particular attention when removing the old filter how it fits inside the filter slot ( orientation)
5. The hardest part is getting the new filter into the filter slot. the way to do it is holding the filter in both hands press the sides in think of an accordion / press sides in then as filter goes in press down on a part the bulges out as you are inserting . Again this procedure makes it easy to install but there is little information exactly how to do . Again think of an accordion
6. reinstall the plastic filter housing cover, install the covering insert the 2 pins and you are done.
I was really surprised at all the leaves etc that were in the old filter
Sponsored