Jan Delivery

[ericj320]

Update from this morning. Mine has now completed BP8.0 and is on it's way to Emden:
Start Production date - 10/26/21 (complete)
Finish Production - 10/30/21 (complete)
In Transit to Emden Port - (current)

Arrival Emden Port - 11/05/21 (est)
On Vessel - 11/26/21 (est)
Arr Benicia, CA - 12/31/21 (est)
At Dealer in SLC - 01/07/22 (est)

It is interesting to see everyone's dates - especially that some of you have the same estimated delivery date even though your cars are heading into production later than mine. Will be interesting to see how this changes as we get closer to delivery. Good luck everyone!

One thing I found out reading posts on Rennlist, the estimated dates are always the Friday of the estimated week until the milestone is reached and then it updates to reflect that actual date, but it doesn’t always force it to move weeks. So it’s not unusual to see similar dates out in the future, even if the previous milestones seemed to happen at earlier dates.

Sponsored

 

[Tandrup]

One thing I found out reading posts on Rennlist, the estimated dates are always the Friday of the estimated week until the milestone is reached and then it updates to reflect that actual date, but it doesn’t always force it to move weeks. So it’s not unusual to see similar dates out in the future, even if the previous milestones seemed to happen at earlier dates.

Makes a lot of sense. Thanks!

Do any of you have access to the shipping/vessel schedule for November? I could only find the October schedule and also saw that Siem Confucius is still in Emden with a departure date of today (11/2) - it's still sitting in Emden as of right now.

 

[ericj320]

Makes a lot of sense. Thanks!

Do any of you have access to the shipping/vessel schedule for November? I could only find the October schedule and also saw that Siem Confucius is still in Emden with a departure date of today (11/2) - it's still sitting in Emden as of right now.

I haven’t seen a Nov schedule posted yet, but as you said, the Siem Confucius is set to leave sometime today. The next vessel to leave for the US is the Siem Cicero, which arrived last night I believe, but I’m not sure of the date of departure or it’s ports of call.

 

[DACSarasota]

Here is mine for a RWD:

Start Production date 11/19
Finish Production 11/19
Ready for Transport and Arrival Emden Port 11/26
On Vessel 12/17
Arrive Jacksonville Port 1/7/22
At Dealer in Sarasota, FL 1/7/22

This has been pretty consistent since I placed the order in July except the original arrival date was 12/24 and got push back one time.

I am quite skeptical of the schedule above that it enters port, gets processed, etc. on the same day it arrives to dealership.

 

[Tandrup]

I haven’t seen a Nov schedule posted yet, but as you said, the Siem Confucius is set to leave sometime today. The next vessel to leave for the US is the Siem Cicero, which arrived last night I believe, but I’m not sure of the date of departure or it’s ports of call.

I think you are right - The Siem Cicero is the next one to arrive in Emden. It looks like it's 76 nautical miles from Emden right now with an ETA 9 hours from now. I couldn't find the ports of call for it's next journey when it departs Emden, but I'll try and see if I can locate it.

Siem Confucius is still in Emden.

 

[Evpower]

Here is mine for a RWD:

Start Production date 11/19
Finish Production 11/19
Ready for Transport and Arrival Emden Port 11/26
On Vessel 12/17
Arrive Jacksonville Port 1/7/22
At Dealer in Sarasota, FL 1/7/22

This has been pretty consistent since I placed the order in July except the original arrival date was 12/24 and got push back one time.

I am quite skeptical of the schedule above that it enters port, gets processed, etc. on the same day it arrives to dealership.

Start production and end production in one day, interesting. Mine shows 14 days start to finish.

 

[Tandrup]

Start production and end production in one day, interesting. Mine shows 14 days start to finish.

FWIW: My actuals for production was 4-5 days (began prod 10/26 and completed prod 10/30). That was for a RWD with several options on it.

 

[DACSarasota]

Yeah...I thought that was odd also.

 

[Bella]

Yeah...I thought that was odd also.

As someone previously said when one date changes sometimes the system (TYD) doesn’t change future dates.

 

[dardleflom]

These on-vessel dates to Benecia are interesting. I was a January delivery and then my car finally finished production, which adjusted the delivery date to Christmas Eve.

But the funny thing is... the car is already in Emden and it'll be on the vessel and departing for Benecia on November 19. I find it hard to believe that there will be two vessels to Benecia, one on November 19 and the other on November 26, such close proximity. I have to think it will be just one boat, and either mine will be on the November 26 or y'alls will be on the November 19th one.

 

[Tooney]

Siem Confucius left port at around 545 pm EDT on Tuesday Nov 2. Incoming Siem Cicero is 60 nm outside of Emden.

 

[mdrobc1213]

Got my TDY invite today and my VIN also is now showing. Car should go into production next week. Mid Jan 22 estimated delivery unless it gets pushed to the right due to chip shortages and shipping delays.

 

[Tooney]

More recent shipping schedule here: https://www.taycanforum.com/forum/attachments/volkswagen_export_schedule-pdf.23533/

 

[andre-s]

Order date: Oct 30th
Freeze Point: 11/19/21
Start Production: 11/19/21
Production Completed: 11/26/21
On Vessel: 12/10/21
Delivery (NJ) 1/07/22

Happy if the timeline confirms, all short wait =)

 

[Tooney]

Got my TDY invite today and my VIN also is now showing. Car should go into production next week. Mid Jan 22 estimated delivery unless it gets pushed to the right due to chip shortages and shipping delays.

Question: Where is your VIN showing up? On the email invitation? On TDY? I don't see my VIN.

Sponsored