Using Car Scanner App to log, understand and diagnose Taycan

[rs38]

yes, there is an accumulated amount of AC charging stored (in kWh), so you can estimated the AC/DC ratio.
I did not find a total amount of energy turnover until now.
But there are also "buckets" of power range statistics in hours in the ECUs. e.g. "-200kw = 3h" which can be DC charging but also regen braking.
With VCDS you can easily explore on you own.

Sponsored

 

[Dee]

yes, there is an accumulated amount of AC charging stored (in kWh), so you can estimated the AC/DC ratio.
I did not find a total amount of energy turnover until now.
But there are also "buckets" of power range statistics in hours in the ECUs. e.g. "-200kw = 3h" which can be DC charging but also regen braking.
With VCDS you can easily explore on you own.

I think @ciaranob would be highly interested in your VCDS findings.

 

[rs38]

feature of car scanner similar to VCDS:

After connecting to the car, go to Settings - Ecu identifiers and select ECUs of choice


extract:

$17. Dashboard

Manufacturer spare part number: 9J1920901AF Manufacturer ECU software version: 0661 ECU serial number: 0K1X6381-97xxxxx
Manufacturer ECU hardware number: 9J1920901E System name: KOMBI LG ODX file id: EV_DashBoardLGEPO513 HW ver.: 017


$5F. Electronic Information System 1

Manufacturer spare part number: 9J1035070BC Manufacturer ECU software version: 3793 ECU serial number: GRO-63326.11.2018020
Manufacturer ECU hardware number: 9J1035070AC System name: MU-TP-ND-EU ODX file id: EV_MUTI HW ver.: 042


75. Emergency Call and Communication Module

Manufacturer spare part number: 4N0035282C 
Manufacturer ECU software version: 0450 System supplier identifier: Harman Becker Automotive Systems ECU manufacturing date (ASCII): 181120 ECU serial number: P114K0LS01xxx
Manufacturer ECU hardware number: 4N0035282 System name: CB_H_ECE_VTS Calibration repair shop code or equipment serial number: 0 Calibration date (ASCII): "
ODX file id: EV_ConBoxHighAU49X HW ver.: 039
ECU manufacturing date (HEX): 181120
Calibration date (HEX): 220901

8C. BMS (UDS)

Manufacturer spare part number: 9J1915234AK
Manufacturer ECU software version: 1641
Manufacturer ECU hardware number: 9J1915234AA
System supplier ECU hardware number: BCUe System supplier ECU hardware version: 11.03 System supplier ECU software number: P2060_PAG_J1_BCU_BCU_APPL_ System supplier
ECU software version: 09.80.05 System name: AA1641A ODX file id: EV_BECM1982091 HW ver.: H13 ECU manufacturing date (HEX): 201126


46. Comfort unit

Soft ver.: 0604
Manufacturer spare part number: 992907064DK
Manufacturer ECU hardware number: 8W1907064K System name: BCM2 MLBevo Calibration repair shop code or equipment serial number: 0 Calibration date (ASCII): "1 ODX file id: EV_BCM2HellaAU736 Programming date (HEX): 3857313930373036344B20 Calibration date (HEX): 220831


51. Electro-engine
Soft ver.: 0021
Manufacturer spare part number: 9J1907121BJ ECU serial number: -00116.01.2110010257
VIN: WP0ZZZY1ZMSxxx
Manufacturer ECU hardware number: 9J1907123F System name: PO9J160210001 ODX file id: EV_PWR1HIAMSPO513 Programming date (HEX): 394A313930373132334620

Programming date (HEX) seems to be a bug as this is only the part number

nice find is:

>Calibration date (HEX): 220901
>Calibration date (HEX): 220831
>Calibration date (HEX): 220830

this is the last firmware programming in my case the week where I got WNJ8, so they really struggled with it.

Also it's possible to conclude the car's build date.
e.g. Telematic Unit is quite old, maybe so many errors with it?

>ECU manufacturing date (HEX): 181120

Battery (BMS) fit quite well with build week.

>ECU manufacturing date (HEX): 201126, 1-2 weeks before

PCM is 5F. Electronic Information System 1
>Manufacturer spare part number: 9J1035070BC Manufacturer ECU software version: 3793

the version everyone can read from insides main display.

please post your data as well to compare some versions ans dates

 

[andb]

Would you know if the amount of kWh charged at AC and DC is stored in there somewhere? I can not find it in the app at present. Would be interesting to see the impact of different charging patterns would have.

@Scandinavian, did you figure out how to read the AC and DC charging data?

 

[Scandinavian]

@Scandinavian, did you figure out how to read the AC and DC charging data?

No I have not been able to find this, if it is available??
Sorry can not help with that.

 

[rs38]

see above!!

https://www.taycanforum.com/forum/t...erstand-and-diagnose-taycan.12052/post-191255

if some of you guys would share VCDS blockmap scans of C6 ECU I could try to reverse even more accurately

 

[Tooney]

feature of car scanner similar to VCDS:

After connecting to the car, go to Settings - Ecu identifiers and select ECUs of choice


extract:

$17. Dashboard

Manufacturer spare part number: 9J1920901AF Manufacturer ECU software version: 0661 ECU serial number: 0K1X6381-97xxxxx
Manufacturer ECU hardware number: 9J1920901E System name: KOMBI LG ODX file id: EV_DashBoardLGEPO513 HW ver.: 017

@rs38
Any way to view information about the HV heater? It has an internal circuit board. I don't see it listed as ecu on scanner.
Certain HW and SW versions mean the heater should be replaced.

 

[Genau]

Is anyone still interested in the data pulled from Taycans using Car Scanner? I was curious about the HV Battery State of Health (SoH) on my October 2020 8,750 mile Turbo S. Here’s what I got but no idea if 93.47% is good or bad

OBDII interface = Vgate iCar Pro via BLE on iOS

Are you following the primary thread on the SoH topic?

https://www.taycanforum.com/forum/threads/baseline-for-hv-battery-soh-performance.12815/​

 

[n3ophyte]

Are you following the primary thread on the SoH topic?

https://www.taycanforum.com/forum/threads/baseline-for-hv-battery-soh-performance.12815/​

No, hadn’t seen that. Thanks for the pointer

 

[Gianni]

see above!!

https://www.taycanforum.com/forum/t...erstand-and-diagnose-taycan.12052/post-191255

if some of you guys would share VCDS blockmap scans of C6 ECU I could try to reverse even more accurately

hello, would you have the PID's that the app is using? Torque Pro uses csv files such as below. it might be easier to start from that csv file to reverse efficiently. I could give a try.

 

[rs38]

the only way to acquire these "PIDs" is sniffing with a Y-cable or be a good digital reverse engineer.
I started like ~10 discussion with potential reversers and explorers promising great expectations in PMs here, never got a single useful result.

 

[Gianni]

the only way to acquire these "PIDs" is sniffing with a Y-cable or be a good digital reverse engineer.
I started like ~10 discussion with potential reversers and explorers promising great expectations in PMs here, never got a single useful result.

thx for answer. yes indeed the y-cable is an option, I will give a try. the other way I was first thinking is to export the csv file from torque Pro (Android) [based on fact that we can import in torque Pro csv files). However, on Car Scanner (on iOS) I did not find the possibility to import/export csv files.

 

[rs38]

feel free to export and share something from Torque.
Carscanner offers export only for custom sensors.

 

[Gianni]

feel free to export and share something from Torque.
Carscanner offers export only for custom sensors.

ok I see. I'll do that. in the meantime, I used y-cable and Carscaner. this is summary what I could read for throttle:

Sponsored