Dave T
Well-Known Member
- Joined
- Jan 14, 2020
- Threads
- 75
- Messages
- 729
- Reaction score
- 367
- Location
- Boston
- Vehicles
- 2020 Taycan Turbo
- Thread starter
- #1
I have my PMCC connected to a 50 amp circuit with a NEMA 14-40 plug. I set the PMCC to a 40 amp charge rate. When I plug it into my car, the car says it's charging at .3 miles/minute. I haven't done the math, but that seems low. On the PMCC, it says it's charging at 2.03 kw/h. Shouldn't it be 9.6 kw/Hr? And, I have a power monitoring system in my house that reported an increased draw of about 8000 watts when I started charging the car. So much higher than the car and the PMCC are reporting, but still below the 9600 watts.
Thoughts?
Thoughts?
Sponsored