Phone holder?

[Caraholic]

It just says left in the description.

Sponsored

 

[dirty martini]

I know, but several people have installed it on the passenger side. I think you just turn it upside down. I ordered one and I'll let everyone know what happens.

 

[eddieterry]

I am another fan of ProClip. It works perfectly.

 

[Scandinavian]

Does it say that in the listing? The pro clip can be mounted on either side. I’ve tried it on both sides in my car.

So have I and mine is installed now on the right hand side.

 

[RAHRCR]

Does the ProClip leave an impression on the leather?

 

[BigBob]

Does anyone have a similar option which is available on amazon uk?

Here you go - It's the same brand as the US one:

https://www.brodit.co.uk/brodit/vehicles/porsche/taycan/proclip-for-porsche-taycan-2024-rhd/6119

 

[Hirschaj]

Does the ProClip leave an impression on the leather?

Yes it does. It’s slight, but it’s there.

 

[PCASSOO]

This will not do anything to the screen at all. I also have a screen protector on there and the double stick attaches to the screen protector not the glass. I had it on the glass before and it didn't harm it at all.

 

[BigBob]

Here you go - It's the same brand as the US one:

https://www.brodit.co.uk/brodit/vehicles/porsche/taycan/proclip-for-porsche-taycan-2024-rhd/6119

To quote Jeremy Clarkson, 'I did a thing!'

I got the proclip and married it up with an apple MagSafe charger.

https://www.brodit.co.uk/
Proclip - 655613
Magsafe charger/mount - 216322

£67

The only slight confusion was the predrilled holes in the clip didn't marry up correctly with the MagSafe mount in the correct orientation. The screws they supply self tap, so attached it to the clip that way.

I've mounted it on the LHS (ie passenger) of the aircon screen. Looks really neat and i just pushed it into place (and didn't use the supplied adhesive patches) and it feels secure.

Bonus discovery was the charging cable squidges into a gap along the side of the arm rest/centre console, so it's pretty neat and no requirement to break stuff doing any dismantling of cupholders etc.

 

[dirty martini]

Looks great. Thank you. Yes, I received the ProClip the other day and will install it tomorrow. I didn't know about the Mag Safe charger so thanks for the info; I'm going to look into that.

 

[Watchesandburgers]

I have the Nine Volt MagSafe cupholder charger. Works great! See previous post with pictures, link here.

 

[BigBob]

I have the Nine Volt MagSafe cupholder charger. Works great! See previous post with pictures, link here.

I like the look of the cupholder ones. But i use the cupholder for cups, and the rear cupholder only useful for people with 3 elbows.

 

[Shawn_Turismo]

I like the setup that I got from www.proclipusa.com

You choose a mount and then a phone holder specific to your phone and put it all together. I chose the Taycan mount obviously and a Charging magsafe mount, although there are many different options. The wire is run into the armrest console and plugged in to provide power. The wire is just pressure fit within the seams of the panels along the way and there was no disassembly.

This looks great and I just got the same one. It presses the screen a bit and creates a very very small gap between the screen and the panel but I would think that’s ok. How did you route the cable under the panels?

 

[nischalr]

This looks great and I just got the same one. It presses the screen a bit and creates a very very small gap between the screen and the panel but I would think that’s ok. How did you route the cable under the panels?

Shawn, the cable is wired purely via pressure fit in between the panels, here are some pictures that illustrate the routing.

 

[Shawn_Turismo]

Shawn, the cable is wired purely via pressure fit in between the panels, here are some pictures that illustrate the routing.

Super helpful, thank you! I got part of it to budge to get this done already but seeing your pictures I’ll try to get the rest hidden as well.

Sponsored