Interior PPF

[Mr.Smith]

Full dash with including all the soft black plastic (to avoid marring).

Both screens to avoid scratches and minimize fingerprints. Didn't do instrument cluster as I don't touch it.

CF sills so it doesn't get shoe stuffs

Xpel makes a pre cut kit as well. Mine needed some hand cutting due to the Weissach badge.

Sponsored

 

[CrazyINP]

I actually did proactive on the lower screen, as I have dropped my phone one to many times, the screen protector is much thicker than xpel and actually protects for impact, and the rear center mainly do the kids kicking it. You don't have to worry about that one . My concern with any PPF on the screen is that change the visibility. as you can already see from your picture it is much more reflective

 

[Mr.Smith]

I actually did proactive on the lower screen, as I have dropped my phone one to many times, the screen protector is much thicker than xpel and actually protects for impact, and the rear center mainly do the kids kicking it. You don't have to worry about that one . My concern with any PPF on the screen is that change the visibility. as you can already see from your picture it is much more reflective

Good point about dropping anything on the screen.

Mine is Stek to is very clear and glossy.

 

[ze_shark]

I had all screens done in satin PPF and it is super effective in terms of antifingerprint protection: i never have to clean them. The interior always looks pristine. The only drawback is that it interrupts the glossy continuity of the dash band

 

[Mr.Smith]

I had all screens done in satin PPF and it is super effective in terms of antifingerprint protection: i never have to clean them. The interior always looks pristine. The only drawback is that it interrupts the glossy continuity of the dash band

Looks great, less glare too. I've seen the entire dash across in Satin PPF

 

[WarpSpeedEV]

How is the touch response with PPF? Any difference from pre-PPF?

 

[ze_shark]

No difference, if not slightly better since there is less propensity to stick slip when you glide. It is like a satin screen protector on a smartphone. You lose a little in sharpness due to the diffusion, but capacitive coupling is not perceivably affected by the 0.2mm of film.

 

[Tango22]

I've had a satin finish kit for the middle and upper PCM screen sat here since October last year. Still in the box, it's one of those 'I'll get around to it sometime' things.

I'll try and get around to doing them sometime this year

 

[wmjsheffler]

Full dash with including all the soft black plastic (to avoid marring).

Both screens to avoid scratches and minimize fingerprints. Didn't do instrument cluster as I don't touch it.

CF sills so it doesn't get shoe stuffs

Xpel makes a pre cut kit as well. Mine needed some hand cutting due to the Weissach badge.

What is CF?

 

[Mr.Smith]

What is CF?

Carbon Fiber

Sponsored