Miwa
Well-Known Member
- Joined
- Oct 3, 2019
- Threads
- 10
- Messages
- 825
- Reaction score
- 856
- Location
- Bay Area, CA, USA
- Vehicles
- Taycan Turbo
That only works with 2021 models. When I plug in, it doesn't show the VIN.
Sponsored
Never worked for me too, but then I only tried once or twice. Can you confirm that after updates it does not work for MY2020?That only works with 2021 models. When I plug in, it doesn't show the VIN.
I tried it once after update, and the charger didn't identify my car. I think others here have reported the same thing for '20 carsNever worked for me too, but then I only tried once or twice. Can you confirm that after updates it does not work for MY2020?
Could also be an improperly installed update then, who knows.The doc is what they hoped to achieve but in practice it is somewhat different.
For example, "Digital cockpit sporadic loading spinners and resets are avoided". I still have them after the update.
The 12v issue might be prevented during charging but I still caught my PCM with a forever spinner while the car was off and not connected to a charger which almost certainly would drain the battery.
Some of the WMA7 improvements do not work for 2020 like displaying SOC on PMCC.
On the other hand, there might be bug fixes which are not described in the doc.
Could be a module used by the radio, no idea.Thanks for posting this!
By the way, it has taken 5 days for the update as the radio update has continued to fail (what the Porsche tech told me). I don’t really see a radio update in the documents??
I could not get it to work either with my 2020 after the WMA5/7 update.Never worked for me too, but then I only tried once or twice. Can you confirm that after updates it does not work for MY2020?
Well, I'll give it go, once I get the updates. Still no word from Porsche though - has been really quiet lately.I could not get it to work either with my 2020 after the WMA5/7 update.
Thank you Chris!Updated WMA5/6/7 TSBs. The new ones are dated April 28th while the old ones were dated March 26.
- WMA5 https://static.nhtsa.gov/odi/tsbs/2021/MC-10191749-0001.pdf
- WMA6 https://static.nhtsa.gov/odi/tsbs/2021/MC-10191750-0001.pdf
- WMA7 https://static.nhtsa.gov/odi/tsbs/2021/MC-10191738-0001.pdf
I am not sure what the changes are compared to previous version but in anyone notices anything let us know.
cc: @Dee
Thanks for the tip. Worked great.Another new feature is the activation of the passenger display when you're driving without a passenger in the seat.
First, select the middle button in the lower middle display.
Then, deselect the checkbox in the pop-up menu in the upper middle display.
This is only possible in Park.
Close the pop-up menu.
If this doesn't work the first time, try this:
-Call up the pop-up menu again.
-SELECT standby mode.
-Put into Drive.
-Put into Park.
-DESELECT standby mode.
-Close pop-up menu.
-Put into Drive.
As long as you don't put it into Park it stays on.
Unfortunately the setting isn't saved so you have to do this every time you start the car...
RE: Passenger ScreenAnother new feature is the activation of the passenger display when you're driving without a passenger in the seat.
First, select the middle button in the lower middle display.
Then, deselect the checkbox in the pop-up menu in the upper middle display.
This is only possible in Park.
Close the pop-up menu.
If this doesn't work the first time, try this:
-Call up the pop-up menu again.
-SELECT standby mode.
-Put into Drive.
-Put into Park.
-DESELECT standby mode.
-Close pop-up menu.
-Put into Drive.
As long as you don't put it into Park it stays on.
Unfortunately the setting isn't saved so you have to do this every time you start the car...