Mwa3aan
Well-Known Member
- Joined
- Jul 9, 2020
- Threads
- 13
- Messages
- 115
- Reaction score
- 142
- Location
- Washington, USA
- Vehicles
- Ford F-150 Raptor, Porsche Taycan Turbo
I finished mine today and it went very smoothly. Turn the wheels to create space, loosen the one screw with the T20 then push a little and pop it out.
Then, to unclip the connector, I found that using a pair of long nose pliers and twisting the connector slightly clockwise allows it to pop off easily. Dont force it too far, just a slight twist and its lose enough that it will just pull off.
I hope that last piece helps.
I did notice that they stand out probably a hair more than the yellow ones once installed. It might be optics with the black rather than yellow but you will notice it when you look straight down the side of the car.
Other than that its a massive upgrade. Thanks to everyone else for all the advice.
Then, to unclip the connector, I found that using a pair of long nose pliers and twisting the connector slightly clockwise allows it to pop off easily. Dont force it too far, just a slight twist and its lose enough that it will just pull off.
I hope that last piece helps.
I did notice that they stand out probably a hair more than the yellow ones once installed. It might be optics with the black rather than yellow but you will notice it when you look straight down the side of the car.
Other than that its a massive upgrade. Thanks to everyone else for all the advice.
Sponsored